AC3601 [ 6 DUTY / 1 STANDBY MANUAL AMPLIFIER CHANGEOVER PANEL ]
________________________________________________________________________________________
| VARIANTS : |
| PX2100 | 120W 100V |
| PX2200 | 240W 100V |
| PX2300 | 360W 100V |
| PX2400 | 480W 100V |
INTRODUCTION
Amperes AC3601 is a manual changeover panel for 6 duty with 1 standby amplifier and is required for a standby unit to take over a failed duty amp to ensure uninterrupted and continuous operation of a PA system. More than one AC3601 can be cascaded for a single standby unit to cater for more than 6 duty packs.
Protection circuitry is embedded that only allows one failed duty amplifier to be taken over by standby unit to prevent overloading. Priority features shall ensure higher numbered failed unit has preference for changeover.
FEATURES
 |
Cater for 6 duty and 1 standby amplifier |
|
Expandable for 1 standby to serve more than 6 duty units |
|
Overload protection by allowing only a single take over |
|
Prioritized changeover - unit with higher number is preferred for changeover |
|
Manual front panel changeover selection |
TECHNICAL SPECIFICATIONS
Operating voltage |
24V DC via PS9400 PSU |
| Power consumption |
Standby : 82 mW, 3.4A |
| Operating : 1.3 W, 50 mA |
| Zone load rating |
400W / 100V line per ch. |
| Amplifier inputs |
6 duty / 1 standby |
| Changeover indication |
Front switch LED |
| Switching mode |
Via front panel switch |
| Cable connection |
Plug in connectors |
| Cable size |
2.5 mm sq |
| Dimension (WxHxD) |
482 x 44 x 180 mm |
| Weight |
2.0 kg |
 Front View Of AC3601 Rear View Of AC3601
|
