EP1200 [ EMERGENCY PAGING PANEL ]
________________________________________________________________________________________
INTRODUCTION
EP1200 is an essential paging tool for firemen during emergency, or when direct paging to all zone is required at the equipment rack. It shall allow direct access to the PA system which would bypass incoming BGM or other normal paging in progress.
Its built in siren tone generator can be triggered manually via the front panel switch or via external fire sensor or fire switch by providing a close contact to the connector at the back of the unit.
FEATURES
 |
Built in siren tone generator (constand signal) |
|
Visual FIRE indicator |
|
External voice message activation |
|
Dual mode siren tone activation |
|
Dry contact when paging mic is activated |
|
Priority paging via front panel microphone, bypassing all other audio sources |
|
Output level controls for siren and message / paging microphone |
TECHNICAL SPECIFICATIONS
| Power requirement |
24V DC |
| Power consumption |
3.5W |
| |
| MICROPHONE |
| Mic sensitivity |
-72 dB Omni directional |
| Impedance |
600 Ohm |
| Frequency response |
300 - 8 KHz |
| |
| SIREN |
| Siren frequency |
Continuous at 8 KHz |
| Siren duration |
Continuous when activated |
| Siren activation |
Front test switch / remote contact |
| |
| Input channel |
Pre-amplifier output, message recorder |
| Output level |
Balanced line out (1.2V) |
| Priority sequence |
Paging mic - siren - message - pre amp in |
| Indicators |
Front FIRE with backlight illumination |
| Dimension (WxHxD) |
482 x 88 x 180 mm |
| Weight |
3.0 kg |
 Front View Of EP1200 Rear View Of EP1200
|
